CP600 Tags are intermingled.
I have a PM590 PLC connected to a CP650 HMI. The HMI is not properly interpreting DWORD tags. I have 2 DWORD tags in the PLC(along with many other tags), and have imported them to the HMI. I can alter the values of the 2 tags from the HMI, and they appear correctly in the PLC, but they almost immediately change to another value when displayed on the HMI. Also, changing one of the tags changes the value of both of the tags on the HMI(but not at the PLC). I cannot duplicate this behavior when starting a new project and only having these 2 tags in it. There is also a UDINT tag(status word from an ACSM1) that doesn't display correctly. Any ideas on what the issue is?