800xA _R5.0E, Domain server_Printer setup_Sharing
I have 800xA system, 5.0RevE, I have installed & configured the 2 printers PR1 & PR2. Now at the operator work place, there is a printer bottun at the application bar , but this is showing only PR1 when I access as operator and showing both PR1 & PR2 when I access as Engineer or with XAINSATLL. I dont know what is wrong with my setup. Its shared both the same configuration.
Thanks for the support
Based on my experience with freelance DCS, I want to you to confirm is it allowed to have access to both the printer as operator in 800xA system? because operator generally uses one printer i.e to print current area of operator workplace might be specific screen, graphic page etc. whereas second printer is used to print alarms, events or logs in real-time. so probably based on operator level access operator is allowed to access only one printer i.e PR1.
I will try to find out specific reason from colleagues around or from documents.
Merging attachment file from new question of same related topic posted on AKS here.
" Please have a look on the attached file. If I access with operator, I will see only PR1 and nothing more. Normally, the operator have also the option to select the printer on which he can send the print CMD"
It is ecomended to continue in same thread for the same topic.