Hi. So I'm using the 560CMR01. I'm trying to get to the Webserver via the MicroUSB port.
No luck so far. I need some instructions getting started.
Voted best answer
I am familiar with RTU520. I am assuming that the following steps are applicable to RTU560 as well.
1) Install RNDIS driver in your PC.This will allow the USB host to emulate a network connection
2) Set the IP of the emulated network port in the same range as that of the default IP of the RTU560 device, specified in its datasheet. For RTU520, default USB port IP is 169.254.0.10
3) Enter the default IP address in a web client like IE.You will be directed to the RTU webpages hosted on the webserver