PROGRAM BACKUP ON CPU
I have a problem when I try to download the program to the CPU with the command "sourcecode dowload". The Contro Builder give me the response on image "schermo" attached....so....you have any good advice to solve the problem?
I must to be able to upload the source code from the cpu when I not have the source program on my pc...
Thanks in advance!
Is the SD card installed and working properly ? You need a 2GB card (SDHC cards dont seem to work at all. You cannot format a larger card down to 2GB) ABB strongly recommend that you use their SD cards but I managed to find some 3rd party SD cards that worked.
If you have a SD card reader on your computer you can also write the card there. But it is better to make sure that you can write to the SD card in the PLC.