Anyone tel me why OPC Server is Showing red cross mark even controllers were pinging?
Tell me, why OPC Server Showing (Data Access and AE) red Cross mark even Controllers were pinging, System is 800xa 5.1 FP3. OPC Server will show yellow Smile after restart the power of controllers.System was upgraded to 5.1 FP3 by 4.1 and controller Firmware upgraded successfully.There is no error in RNRP this is happening once in 24hrs. please let me know where am i wrong ?
Answers
What does the logfile say? (C:\ABB Industrial IT Data\Control IT Data\OPC Server for AC 800M\LogFiles\Session.LOG)
Ping and RNRP use other ports and protocols than the OPC Server does. A successful ping does not necessary mean that the MMS communication between the OPC Server and the controller is OK. For OPC DA, the OPC Server also need access to the configuration files created by Control Builder.
Is the MMS Server OK (C:\ABB Industrial IT Data\Control IT Data\MMS Server for AC 800M\LogFiles\Session.LOG)?
Ping and RNRP use other ports and protocols than the OPC Server does. A successful ping does not necessary mean that the MMS communication between the OPC Server and the controller is OK. For OPC DA, the OPC Server also need access to the configuration files created by Control Builder.
Is the MMS Server OK (C:\ABB Industrial IT Data\Control IT Data\MMS Server for AC 800M\LogFiles\Session.LOG)?
Add new comment