Sending SMS notification using Huawei Modem
I am configuring email and sms notification. Everything it's going ok, I did all the configurations and the email it's working properly. The problem is the sms. I am not getting the messages. Even if the SMS event log list in the control structure is registering that the message is properly sent, I am not getting the message in the phone, I have tried configuring the phone number in different ways but this seems not to be the problem.
I think that is something to do with the connection to the modem.
If I start the modem firs, I am not allowed to add the configuration in the "SMS Device " because the COM6 is used by the "HUAWEI Mobile Connect - 3G PC UI Interface (COM 6)"
So I cannot star the Huawei.. would be this the problem?? should I have to configure in the "SMS Device" -> "Device Properties" a manually iniatialization with a AT command??
Any ideas will be really appreciated!! :)
Voted best answer
maybe this can help...
Do you have next document?
Check page 600.
All right everyone I did it! .. the virtual machine issue was that the network adapter mini port wasn´t activated in the real machine so it couldn´t do the connection. Once I did that I manage to send SMS following the cnfigurations shown in the configuration manual. In my particular case, it wasn´t necessary to use an init string for the modem.
I hope this helps someone else too :)