CI860 Dual LED not working
CI860 dual led is not coming, but functionality wise it is working fine.It is switching over when we plug out the cable fron the primary or secondary CI860.
In the CI860 Hardware status tab, it is showing as warning.
What may be the reason
System version 800xa rev-e fp4.
Need some more details to conclude it is the issue with hardware or other.
Most likely it would be the HW problem, since the functionality is working fine.
However please let me know the following:
1. DUAL LED is glowing on both CI860 modules (Primary and Secondary)?
2. What is the warning (error code) on CI860 module?
If the DUAL LED is ON, on one module and OFF on other, then it would be HW problem.
In this case i suggest you to remove the module from base and remove the module cover and check. Sometimes LED on PCB might not be aligned with glass on module cover. Otherwise the LED might be faulty.
If the DUAL LED is OFF on both the modules (very rare), then please share the error code/warning details. Try to check the one by one module by removing from the base and remove cover to check the LED is aligned properly with cover glass.
Hope this helps you for initial troubleshooting.