Error 9159 on cpu ac800m
I have a problem which that the falut led is flashing and it seems no problem in cpu, when I tried to download program by control builder version 5.0.2, I can't go online or download and have the message "error 9159"
When I searched for this error other people gives solution that I must upgrade firmware version, and I don't know how to upgrade version!, can anyone help me please?
There are many other posts for that in AKS, also in the help of Control Builder - please look for details.
Usually that is done with the black cable TK212, connected to COM4 port of the CPU.
You have to start the Serial Firmware Upgrade tool, part of Control builder.
Also you can do that from Control Builder -> Tools -> Maintenance -> Remote System... or by CF with a valid project
Please refer below links for 800xA 5.1 FP4 manuals for AC 800M firmware upgrade procedures. Though the below are 800xA 5.1 FP4 manuals, the procedure is same for AC 800M controllers firmware upgrade.
1. From the above refer 3BSE041880-511, Page-75/76 for Firmware Upgrade via Serial Cable (TK212A). In this procedure you need to connect TK212A cable between AC 800M controller COM4 port and COM port of PC/Machine containing Serial Firmware Upgrade tool/application.
2. From the above refer 3BSE035980-511, Page-212 for Upgrading Firmware using Backup Media. You need CF or SD card along with card reader in this procedure.
You know the reason for fault LED flashing on AC 800M controller?
Normally this will happen if the firmware upgrade is failed/interrupted during the upgrade. If this is the reason for the fault LED flashing in your case, then option-1 won't work/resolve the fault LED flashing!
You need to follow the option-2, Upgrading Firmware using Backup Media.
If you are not sure why the fault LED flashing on AC 800M controller, I suggest you to try both option-1 and option-2 (provided option-1 didn't resolve the issue).
I hope this helps you.
Source: 3BSE041880-511, 3BSE035980-511