Operator Station Error
I use 800xA SP4.There are 4 servers and 2 operator station computer.Yesterday,one of the operator station started the disconnection (status=disable) error.I reach the OS computer from server but system is disable. I remove the OS from AS1 and add the OS node again but nothing is happened.How can I solve the problem.
You can try providing Software User settings again on the OS node using Configuration Wizard.
Open configuration wizard.
Press maintenance stop.
Go to Software User settings in Configuration wizard and provide service account details once again.
And then restart the node.
Probably your problem will get resolved.
Please ensure the following:
1.Firewall has been disabled in both domain,aspect/connectivity nodes,operator stations.
2.Check the time zone in both domain & opertor stations & aspect/connectivity are same.
3.ensure prefered & alternate DNS servers (only primary Network IP)are confgured as per your system configuration.
4.Ensure if you goto command prompt in operator stations enter"net view" it should show all computers.
5.Check RNRP viewer is showing all your domain, aspect/connectivity nodes.