800xA History Empedded Data Collector install failure: exit:10 The Environment is incorrect.
I am trying to fix broken istallation of 800xA History Empedded Data Collector on redundant connectivity server. Recommended prodecure was to manually uninstall and reinstall the application.
I managed to uninstall components manually but during installation i get Failure Exit Code 10: The Environment is incorrect (see attached screenshot). I dont know what could cause the failure, any ideas on the matter are appreciated.
Other one of the redundant Connectivity Servers with identical HW and SW is working correctly and the Embedded Data Collector is running fine.
i had a simliar problem, but i do not remember the error code.
after you manually uninstalled the application, make sure that the NIC address is left blank before you start reinstall. it seems that fixed my problem.
from what i remember, when you reinstall the DCN, it will set the IP address for the NIC that you are going to pick it.