Client is not getting 800xA system running
I am trying to connect engineering client with ASCS server in workgroup. I am using 800xA SV5.1 RevC. Client is getting connected with server but with red notification icon. Even service connection viewer shows system is stopped but in AS system is running.
Windows Firewall is off at both side (server & client).
What could be the problem preventing client to access running system ?
Time in both ASCS & client are same. But still after getting connected with server, client shows system is stopped but in actual system is running.
I have tried to connect that client as connectivity server and it gets connected and working good.
Do not know what is happening ..!!!!!
We got solution for this,
We format Server and client
We started following windows services in auto mode :
1 ) Function Discovery Provider Host
2 ) SSDP Discovery
3 ) UPnP Device Host
After starting above services, we made Network Discovery Turned On from Network and Sharing Center -- Advanced Sharing settings''.
After doing above steps we install 800xA softwares.
Now clients are getting connected with server and working fine.