When we open a faceplate from operator workplace and select Print , in 800xa 5.0 it print faceplate and display . After upgrade to 800xa 6.0.3 it only prints display not faceplate.
Is it possible to print faceplate and display when pressing the print button from workplace
There are in principle two methods to print:
1. The traditional print tool
2. The PG2 print display tool
The sooner has a parameter for print destination which can be set for: "window", "screen" or "workplace". This parameter can be edited in the Library Structure below Tools. The tool can be copied and renamed appropriately, e.g. "Print Window Tool", "Print Screen Tool" and "Print Workplace Tool" for easier use. The print tool can be called from many different places (Application Bar, Window Frame, etc) depending on your workplace layout and design.
The latter is restricted to print the PG2 display it was called from (the print verb is only visible on the context menu of PG2 aspects). The reason for the second tool was to provide a better print result if color substitution is desired. PG2 uses Font Antialising (smooth screen fonts) which uses interpolated colors making color subtitution before printing a difficult task. The PG2 print display tool temporarily disables antialising when printing.