OPC for AC800M
I need to use one kepserverOPC or MatrickonOPC for read data from the AC800M controller. Is it posible? Or I need other OPC brand.
You must install the AC800M OPC server software.
Usually there is already an OPC server installed from "default config" of Compact HMI or 800xA HMI. Please try connecting there first.
Its possible to install additional OPC servers, but they will need config files from Control Builder M after each download. Within CHMI and 800xA this transfer is automatic, but if you add an external OPC server node you must solve this transfer somehow; up until version 2 this could be arranged with FTP server(s) in all nodes with CBM or with MMS service. Unsure how this works in present version(s)