Blurry text in PG2 objects
When connected with remote desktop to a terminal server (800xA 5.1E) pulp and paper libraries show text that is very blurry. See attached picture.
It can be temporarily resolved by hovering the mouse over one of the objects, but it will return to the way it was quickly.
I've tried all display settings in RDP and nothing changes the text (The problem may even persist on a local client, but that is not what is used on this site). I have read there are some problems with WPF, but how would one change this without negative effects on the rest of the system?
Voted best answer
Did you try this option?
1. Click on Start, type Remote Desktop Connection.
2. Open Remote Desktop Connection, click on options.
3. Click on Experience Tab; put a check on font smoothing.
4. If it is already checked then uncheck font smoothing
If you did it, some users talk in Internet about the graphical card of the computer where you launch RDP
I hope this could help you.
One issue I've seen with PG2 graphics is that the graphic itself is set to a different resolution than the actual display with a "stretch" setting enabled to fill all available space.
To remedy the situation, look at the graphic by itself (open through plant explorer or engineering workplace) and adjust the dimensions of the graphic in the graphics builder. You will also have to adjust text size and graphic elements if this is the issue.
Judging by your screenshot this is not the case: it might be a worth a try though.