PM583-ETH with Digivis 500 not working
I have a simple system which was running smoothly a day before & now i face this issue.
PM583-ETH CPU & I/OS communicating through (OPC) ethernet to PC (with Digivis 500).
Suddenly when i see my system today in the morning, i see i am not being able to operate through digivis 500 nor there is any error message.
I checked for all settings, all were ok.
The only thing i saw to be fishy was, the ETH blinking on PM583-ETH has become slow as compared to earlier.
Please guide me how i can solve this issue.
I would log into the plc and open a PLC browser to see how many connection where online on the plc.
1. Coupler desc
2. Coupler settings
And probably do a diagshow all to see if there are any ethernet related errors.
If not i would try a reboot and see if the issue is solved. If the issue reoccur I would start
logging on the ethernet with fx wireshark.
And always do a firmware upgrade.
Also received this info from our support if you still have problems?
please login and go to PLC Browser, type the following commands
and go to Menu "Extra" and choose "Save History list"
Please send us this file together with version of
to the following Email Address