How to configure Smart Client on 800xA 6.0.2 and access PG2 graphics from non 800xA PC?
We are trying to configure Smart Client 2.2 Rev C for the first time. We have one Server cum engineering(aspect cum connectivity) server having 800xA 6.0.2 Node on it and one windows 8.1 non xA HMI PC. We want to access the PG2 graphics on this HMI PC. Smart Client Server and Data provider has been installed on engineering node. Now the question is whether in the HMI PC we need xA installed? Also how to configure the graphic pages into it?
Any kind of support on configuing it is appreciated. Share documents on smart client if any.
At this point, I believe there are too many questions about this installation to provide an accurate evaluation of your issue. My suggestion would be to open a Supportline case with your local RAC that can assist you in this request.
To launch the Smart Client Desktop:
1. Enter the url http:// <web server IP address>/SC for Standalone mode or
http:// <web server IP address>/SC?FEATURE=SCPG2 for PG2 mode in the
address bar of the Internet Explorer. in Windows 8.1 non xA HMI PC
for PG2 you need to have .net 4.5