Process panel 800 communication with AC900F through Modbus Tcp
How to communicate with process panel 800 and AC900F
where AC900 F is the master
Voted best answer
The configuration both in Freelance and Panel 800 are similar for Modbus TCP and RTU.
On Freelance side (AC 900F) You need to:
1. In hardware manager add and configure Modbus TCP Master Interface to Your AC 900F
2. Add another program to You controller resource and configure communication with Modbus Master blocks (these are the same for RTU and TCP). Remember to choose proper Interface in block parameters.
On Panel side You need to simply add tags with proper set source (Modbus TCP, of course). I strongly suggest checking associated app on AKS (see link below).
Hope it helps,